| PART |
Description |
Maker |
| KDZTR24B |
Small power mold type.
|
Rohm
|
| PTZTE2512A PTZ9.1 PTZ22 PTZ10 PTZTE2516A PTZ4.3 PT |
Voltage regulation
Zener Diode
Small power mold type
|
Rohm
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| PS21961-AT PS21961-CT PS21961-T PS21961-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| NNCD68PH NNCD6.8PH NNCD6.8PH-T2 NNCD6.8PH-T1 |
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUARTO TYPE: COMMON ANODE 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电二极管噪声裁剪季刊类型：共阳引脚超小微型模具
ESD noise clipping diode 5pin SC-88A
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| NNCD6.8RL |
ESD noise clipping diode 5-pin XSOF (flat lead type) low capactance
5-PIN SUPER SMALL MINI MOLD (FLAT LEAD TYPE) ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUAD TYPE: COMMON ANODE) 5针超小微型模具（扁平引脚型）静电放电噪声裁剪二极管（四型：共阳极
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| MN2488 MN2488Y MN2488O MN2488P |
MOLD TYPE SILICON POWER TRANSISTOR
|
SANKEN[Sanken electric]
|
| KB161M-20 |
Power mold type, High reliability
|
TY Semiconductor Co., Ltd
|
| RPI-243 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
Sensors > Photointerrupters > Linear Phototransistor output
|
Rohm CO.,LTD.
|
| NNCD5.1F NNCD5.6F NNCD6.2F NNCD6.8F NNCD4.3F NNCD4 |
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE, ANODE COMMON 3PIN MINI MOLD 静电放电二极管双噪音裁剪式，阳极通用3针迷你模
RES 309-OHM 0.5% 0.10W 25PPM THIN-FILM SMD-0805 TR-7-PA ROHS
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE / ANODE COMMON 3PIN MINI MOLD
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE ANODE COMMON 3PIN MINI MOLD
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
